Kickstarter De Ürün Almak(Bilgi Almak)
-
FireX bunu yazdıexchanger bunu yazdı
Reçine kaç para ? Bulamadım ben fiyatını. Esas önemli olan o bence.
Bu ürün için kendi üretimleri olan reçine lazımmış ve 100mL $15 diyorlar.
Hocam fiyatı oradaki hareketli resimde yazanlardan mı hesapladın?
https://ksr-ugc.imgix.net/assets/005/305/113/9771d2e5acb76df8dc39e0b3fc97be68_original.gif?w=680&fit=max&v=1454601608&q=92&s=e1d07c318f8821fdabccc0d87d3f5ca8
-
yustang bunu yazdıFireX bunu yazdıexchanger bunu yazdı
Reçine kaç para ? Bulamadım ben fiyatını. Esas önemli olan o bence.
Bu ürün için kendi üretimleri olan reçine lazımmış ve 100mL $15 diyorlar.
Hocam fiyatı oradaki hareketli resimde yazanlardan mı hesapladın?
https://ksr-ugc.imgix.net/assets/005/305/113/9771d2e5acb76df8dc39e0b3fc97be68_original.gif?w=680&fit=max&v=1454601608&q=92&s=e1d07c318f8821fdabccc0d87d3f5ca8
Sayfanın en altındaki FAQ kısmında yazıyor.
In addition to the option of adding resins and other gear to your pledge at the end of the campaign using BackerKit (a link to which will be emailed to all backers when the campaign ends), we will also sell the resins, printers, gear, and accesories on our website. Additionally, we are currently considering other distributers for the OLO and its resins. We will keep all Kickstarter backers up to date on where they can buy resins after the Kickstarter ends.
Resin will be available for $15 per 100mL bottle (not including local taxes and import costs if applicable).
-
FireX bunu yazdıyustang bunu yazdıFireX bunu yazdıexchanger bunu yazdı
Reçine kaç para ? Bulamadım ben fiyatını. Esas önemli olan o bence.
Bu ürün için kendi üretimleri olan reçine lazımmış ve 100mL $15 diyorlar.
Hocam fiyatı oradaki hareketli resimde yazanlardan mı hesapladın?
https://ksr-ugc.imgix.net/assets/005/305/113/9771d2e5acb76df8dc39e0b3fc97be68_original.gif?w=680&fit=max&v=1454601608&q=92&s=e1d07c318f8821fdabccc0d87d3f5ca8
Sayfanın en altındaki FAQ kısmında yazıyor.
In addition to the option of adding resins and other gear to your pledge at the end of the campaign using BackerKit (a link to which will be emailed to all backers when the campaign ends), we will also sell the resins, printers, gear, and accesories on our website. Additionally, we are currently considering other distributers for the OLO and its resins. We will keep all Kickstarter backers up to date on where they can buy resins after the Kickstarter ends.
Resin will be available for $15 per 100mL bottle (not including local taxes and import costs if applicable).
teşekkürler hocam o kadar iyi ingilizcem olmadığı için son kısmı anlayamamaşım
-
Bunun için yedek telefonu kullanmak lazım. Normal insan 3 saat boyunce telefonunu kapat(a)maz.
What happens when I get a phone call or text while printing?
The phone must be in airplane mode, the wifi must be disconnected, and alerts must be turned off during printing.
What is the average pinter speed/layers per minute?
The OLO can print a single layer of a thickness of 0.035mm to 0.2mm (and of any width or length -OLO print times are independent of the XY dimensions of the object being printed) in 20-32 seconds. The time is determined by the brightness of the screen of your smartphone. For example: an iPhone 6 can print a 1cm tall object in approximately 46 minutes, or 1 inch in approximately 1 hour and 55 minutes.
-
FireX bunu yazdıexchanger bunu yazdı
Reçine kaç para ? Bulamadım ben fiyatını. Esas önemli olan o bence.
Bu ürün için kendi üretimleri olan reçine lazımmış ve 100mL $15 diyorlar.
Para değilmiş aslında alınır.
-
2m $ mı toplamışlar bu proje için ?
-
mesajım olsun